lets you send and receive SMS messages using SIMCom SIM7000 series LTE/GPRS module.
It provides action
Using this action, you can send SMS messages to mobile phones from automation scenarios or as a reaction to an event.
The action has parameters:
number- phone number of the recipient. Use international number format (e.g. +358403268838)
message- text of the message
All required drivers for SIM7000 module should be installed separately.
Sim card PIN code must be disabled.
portName = COM5 baudRate = 115200
portName- COM port, at which SIMCom module expects AT commands. You can find the port name in Device Manager, under the section "Ports (COM & LPT)." The port is called "SimTech HS-USB AT Port 9001."
baudRate- speed of serial communication. By default, the
baudRateshould be set to 115200.
It is possible to receive SMS messages to AutoBits.
AutoBits will automatically extract events and data points from incoming SMS messages if they are formatted in the following way:
[event source]::[event name] - for an event.
[channel name]::[value]::[unit] - for a data point.